Evader (ST/DT/EXT/EXT2/EXB & BL)

This is the Differential Bevel Gear Set for the Duratrax Evader EXT FEATURES: Steel construction, black in color Replaces worn or damaged differential bevel gears INCLUDES: Two large planetary gears - key number 13 _ One differential cross pin B - key number 19 One differential cross pin A - key number...

This is the Diff Output Joint Set for the Duratrax Evader EXT FEATURES: Steel construction, black in color Replaces worn or damaged output joints INCLUDES: Two Diff Output Joints - key number 10 Two 1x7mm Diff Joint Pins - key number 11 REQUIRES: Installation following the model manual SPECS: Length:...

This is the replacement Gearbox Set for the Duratrax Evader EXT FEATURES: Nylon construction, black in color Replaces a worn or damaged gearbox INCLUDES: One Left Gearbox Half - key number 20 One Right Gearbox Half - key number 21 One Gearbox Dust Cover - key number 7 REQUIRES: Assembly and installation...

This is the replacement top shaft for the Duratrax Evader ST. This is the shaft that supports the transmission. FEATURES: Metal construction Silver in color 18T gear integrated on the shaft INCLUDES: One Topshaft w/18 Tooth Gear One 2x10mm spring pin Two 5.4mm washers REQUIRES: Installation into an Evader...

This is the Front Body Mount for the Duratrax Evader. It attaches to the front shock tower to be used as a body mount. FEATURES: Plastic construction. Black in color INCLUDES: One front body mount. Two metal body mounting clips REQUIRES: Direct replacment part, nothing needed. SPECS: Height: 1.6" (41mm)...

This is the stock replacement front bulkhead set for the Duratrax Evader ST. The Suspension arms and Shock Tower mount to this. FEATURES: Black nylon construction INCLUDES: One front bulkhead (key #51) One 3mm bulkhead hinge pin (key #103) 36.5mm long One suspension pin plate (key #82) 54.4mm long 3.5mm...

This is the replacement Diff Joint Spring Set for the Duratrax Evader EXT FEATURES: Steel construction, black in color INCLUDES: Four Diff Joint Springs - key number 22 REQUIRES: Installation following the model manual SPECS: Length: .20" (5mm) Diameter: .20" (5mm) Wire Diameter: .015" (.38mm)

This is a pair of replacement Front Hub Carriers for the Duratrax Evader EXT FEATURES: Nylon construction, black in color Replaces worn or damaged hub carriers INCLUDES: Two Front Hub Carrier - key number 28 REQUIRES: Installation following the model manual COMMENTS: For the front knuckle arms order...

These are Replacement Rear Hubs for the Duratrax Evader EP. FEATURES: Black Plastic Construction Includes plastic spacers Includes metal Axle Sleeves INCLUDES: One Left Hub (#26) One Right Hub (#27) Four Washers (#58) Two Axle Sleeves (#88) REQUIRES: Evader SPECS: Hub Washer Sleeve Length: 31.8 mm (1.25")...

These are replacement King Pins for the Duratrax Evader ST. FEATURES: Steel construction INCLUDES: Twin King Pins and four 2.75 x 5.5 x .8mm kingpin spacers REQUIRES: E-Clip (2mm) SPECS: Length: 35mm (1.378") Diameter: 2.4mm (0.096") Ball Diameter: 4.3mm (0.172")

These are the replacement Slipper Pads from Duratrax. These work on the Evader trucks. FEATURES: Blue rubber slipper pads, Key #64 INCLUDES: Two slipper pads for the Duratrax electric Evader truck REQUIRES: Installation COMMENTS: These work on the Nitro and Electric Evader Vehicles.

This is the replacement Front Shock Tower for the Duratrax Evader EXT FEATURES: Composite nylon construction, black in color Replaces a worn or damaged shock tower INCLUDES: One Front Shock Tower - key number 49 REQUIRES: Installation following the model manual SPECS: Length: 3.17" (81mm) Width: 3.31"...