DURATRAX Replacement Parts
DURATRAX Replacement Parts
Servo Saver Post Left SFGP2This is the Servo Saver Left Post for the Street Force GP2. FEATURES: Black steel construction INCLUDES: One left post (Key #110) REQUIRES: Installing on vehicle SPECS: Length: 1.2" (30.1mm) Diameter: 0.16" (4.1mm)
DURATRAX Replacement Parts
Bulkhead Center Street Force GPDTXC6815 Duratrax Bulkhead Center Street Force GP SKU:dtxc6815 UPC:753600268157 CONDITION:New This is the Center Bulkhead for the Street Force GP Kits. Features: Black nylon construction.
DURATRAX Replacement Parts
Diff Balls 1/8" SFGP (8)These are the Differential Balls for the Street Force GP. FEATURES: Steel diff balls INCLUDES: Eight diff balls (#21) SPECS: Diameter: 1/8"
DURATRAX Replacement Parts
Diff Rings (2) SFGPThese are the Differential Rings for the Street Force GP. FEATURES: Steel diff rings INCLUDES: Two diff rings (#24) SPECS: Outer Diameter: 20.7mm Inner Diameter: 12mm
DURATRAX Replacement Parts
Steering Drag Link Street Force GP 2 (2)Steering Drag Link Street Force GP 2 (2)
DURATRAX Replacement Parts
Steering Rod Set SFGPThis is the Steering Rod Set for the Street Force GP. FEATURES: Steel rod Black nylon rod ends Steel ball studs INCLUDES: One 32.5mm rod (#113) Two 4mm ball studs (#49) Two 4mm rod ends (#114) COMMENTS: This is the rod that goes between the servo arm and the servo saver.
DURATRAX Replacement Parts
Thrust Balls 1/16 (10) SFGPThese are the Thrust Balls for the Street Force GP. FEATURES: Steel thrust balls INCLUDES: Ten thrust balls 1/16"(#27) COMMENTS: These balls go between the thrust washers(#26)
DURATRAX Replacement Parts
Thrust Washer (2) SFGPThese are the Thrust Washers for the Street Force GP. FEATURES: Steel thrust washers INCLUDES: Two thrust washers(#26) COMMENTS: The thrust balls(#27) go between the washers and then all go into long diff joint(#25).
DURATRAX Replacement Parts
Tie Rod w/Ends (2)These are the Replacement Tie-Rods for the Street Force GP. These are Mounted onto a 4mm ball on the Steering Bellcrank and the Front Wheel Hubs. Features: Turnbuckles: Metal Construction. Threaded on both ends. Integrated Nut in Middle of Turnbuckle for easy adjust. Silver in Color Ballcups: Nylon Construction. Made to accept 4mm Balls. Black in Color. Includes: Two 20mm Turnbuckles. Four 4mm Ball Cups.
DURATRAX Replacement Parts
Wheel Hub Front (2) SFGPThese are the Replacement Front Wheel Hubs for the Street Force GP. This holds the Front Axle and attaches to the Hub Carrier. FEATURES: Nylon Construction Made to Accept 5X10mm Bearings Black in Color INCLUDES: One Left Front Wheel Hub One Right Front Wheel Hub
DURATRAX Replacement Parts
Servo Saver Post RightThis is the Right Servo Saver Post for the Street Force GP. FEATURES: Steel spring Aluminum post and nut Brass shaft INCLUDES: One spring(#105) One post(#102) One nut(#106) One shaft(#101) REQUIRES: The servo saver arms (DTXC8855)
