Evader (ST/DT/EXT/EXT2/EXB & BL)
Evader (ST/DT/EXT/EXT2/EXB & BL)
Diff Output Joint Spring (4)This is the replacement Diff Joint Spring Set for the Duratrax Evader EXT FEATURES: Steel construction, black in color INCLUDES: Four Diff Joint Springs - key number 22 REQUIRES: Installation following the model manual SPECS: Length: .20" (5mm) Diameter: .20" (5mm) Wire Diameter: .015" (.38mm)
Evader (ST/DT/EXT/EXT2/EXB & BL)
Spur Gear 48p 81t EVBXThis is the Spur Gear for the Evader BX from Duratrax. FEATURES: Black plastic construction INCLUDES: One 48 pitch 81 Tooth spur gear REQUIRES: Installation on the Evader BX SPECS: Diameter: 1.75:/ 44.45mm Thickness: .125"/ 3.175mm COMMENTS: This is a direct fit replacement spur gear for the Evader BX.
Evader (ST/DT/EXT/EXT2/EXB & BL)
Spur Gear 88t 48p EVSTThis is the Stock Replacement Spur Gear for the Duratrax Evader ST. This is the main gear of the vehicle. FEATURES: Durable nylon construction INCLUDES: One 88 Tooth Spur Gear (key #16) Two 3x6mm round head machine screws (key J) REQUIRES: Installation onto vehicle. SPECS: Total outer diameter: 47.4mm (1.87") Inner diameter: 9.6mm (0.38") Pitch: 48P Thickness: 4.9mm (0.19") COMMENTS: Currently, there is no optional part that replaces this gear. To adjust gear ratio, choose a different 48P pinion gear.
Evader (ST/DT/EXT/EXT2/EXB & BL)
Body Mount Front EVSTThis is the Front Body Mount for the Duratrax Evader. It attaches to the front shock tower to be used as a body mount. FEATURES: Plastic construction. Black in color INCLUDES: One front body mount. Two metal body mounting clips REQUIRES: Direct replacment part, nothing needed. SPECS: Height: 1.6" (41mm) Overall Width: 1.8" (46mm) Width between body mounting lugs, on-center: 1.46" (37mm) Body Mounting Lug diameter: .25" (6.35mm) COMMENTS: If mounting screw are needed, use DTXC8635
Evader (ST/DT/EXT/EXT2/EXB & BL)
Bulkhead Front EVSTThis is the stock replacement front bulkhead set for the Duratrax Evader ST. The Suspension arms and Shock Tower mount to this. FEATURES: Black nylon construction INCLUDES: One front bulkhead (key #51) One 3mm bulkhead hinge pin (key #103) 36.5mm long One suspension pin plate (key #82) 54.4mm long 3.5mm thick REQUIRES: Assembly onto Evader ST SPECS: C.D. between suspension mounting holes: 46mm (1.82") Pin length: 36.8mm (1.45")
Evader (ST/DT/EXT/EXT2/EXB & BL)
Diff Gear/Case Evader EXTThis is the replacement Diff Gear/Case for the Duratrax Evader EXT FEATURES: Nylon construction, black in color Replaces a worn or damaged Diff Gear Case INCLUDES: One Diff Gear - key number 18 One Diff Case Cover - key number 12 REQUIRES: Assembly and installation
Evader (ST/DT/EXT/EXT2/EXB & BL)
Front Axle Evader EXT (2)This is a pair of replacement Front Axles for the Duratrax Evader EXT FEATURES: Steel construction, silver in color Replaces worn or damaged front axles INCLUDES: Two Front Axles - key number 91 REQUIRES: Installation following the model manual SPECS: Length: 1.46" (37mm) Diameter: .25" (6.31mm) where it keys into the knuckle arm Diameter: 3/16" where the wheel bushing rides Thread Size: 4mm
Evader (ST/DT/EXT/EXT2/EXB & BL)
Hub Carrier Evader EXT (2)This is a pair of replacement Front Hub Carriers for the Duratrax Evader EXT FEATURES: Nylon construction, black in color Replaces worn or damaged hub carriers INCLUDES: Two Front Hub Carrier - key number 28 REQUIRES: Installation following the model manual COMMENTS: For the front knuckle arms order DTXC8213 For the hinge pins order DTXC8028
Evader (ST/DT/EXT/EXT2/EXB & BL)
Hub Rear (2) EVSTThese are Replacement Rear Hubs for the Duratrax Evader EP. FEATURES: Black Plastic Construction Includes plastic spacers Includes metal Axle Sleeves INCLUDES: One Left Hub (#26) One Right Hub (#27) Four Washers (#58) Two Axle Sleeves (#88) REQUIRES: Evader SPECS: Hub Washer Sleeve Length: 31.8 mm (1.25") n/a n/a Width: 16.8 mm (0.66") 1.3 mm (0.05") 4.3 mm (0.17") Height: 19.1 mm (0.75") n/a n/a Inner Diameter: n/a 3.8 mm (0.15") 5.3 mm (0.21") Outer Diameter: n/a 7.6 mm (0.30") 6.9 mm (0.27")
Evader (ST/DT/EXT/EXT2/EXB & BL)
King Pin (2) EvStThese are replacement King Pins for the Duratrax Evader ST. FEATURES: Steel construction INCLUDES: Twin King Pins and four 2.75 x 5.5 x .8mm kingpin spacers REQUIRES: E-Clip (2mm) SPECS: Length: 35mm (1.378") Diameter: 2.4mm (0.096") Ball Diameter: 4.3mm (0.172")
Evader (ST/DT/EXT/EXT2/EXB & BL)
Knuckle Arm Evader EXT (2)This is the replacement Knuckle Arm Set for the Duratrax Evader EXT FEATURES: Nylon construction, black in color Replaces worn or damaged knuckle arms INCLUDES: One Left Front Knuckle Arm - key number 24 One Right Front Knuckle Arm - key number 25 REQUIRES: Installation following the model manual COMMENTS: For the front hub carriers order DTXC8039 For the front axles order DTXC6172 For the kingpins order DTXC8199
Evader (ST/DT/EXT/EXT2/EXB & BL)
Slipper Pad Blue Evader (2)These are the replacement Slipper Pads from Duratrax. These work on the Evader trucks. FEATURES: Blue rubber slipper pads, Key #64 INCLUDES: Two slipper pads for the Duratrax electric Evader truck REQUIRES: Installation COMMENTS: These work on the Nitro and Electric Evader Vehicles.
