Starting Equipment
OFNA/Hobao Replacement Parts
Shaft, 6x200mmOfna Racing Shaft, 6x200mm for a variety of Roto start equipment
Starting systems
Start Shaft For Ft Torque StartFastrax Start Shaft For Ft Torque Start BRAND: FASTRAX PART NUMBER: FT02622A Fastrax Start Shaft For FT Torque Start (HEX TO BALL HEX) Fastrax Start Shaft For FT Torque Start
Starting Equipment
Glow Starter ExtensionVenom 1621 Glow Starter Extension FEATURES: Glow starter extension with black and red wires Ideal for in-cowl hard to access engine applications INCLUDES: One glow starter extension REQUIRES: Charging SPECS: Total Length: approx 6.7 (170mm) ==============
Starting Equipment
Rotostart 3 Starter Shaft 225mm160243 - Rotostart 3 Starter Shaft 225mm Starter Shaft only for the HPI Roto Start 3 System This Xtra-Long startingshaft will make sure you can get through to the back of the engine without struggle even on the Savage XL 5.9 Genuine HPI quality spare part to provide easy maintenance and repairs for the HPI Roto Start 3 System.
Starting Equipment
Starter Shaft With O-Ring savage XL (225mm)#87104 - STARTER SHAFT WITH O-RING (225mm) SAVAGE XL Replacement Starter Shaft for the HPI Roto Start 2 System #87148 Also can be used with any other HPI Roto Start 2 System if you require some extra reach. For example. Makes life easier when using a Roto Start on a Trophy Truggy.
Starting Equipment
HPI Nitro Start Backplate Set (G/F Series Engines)109535 - HPI NITRO START BACK PLATE SET (G/F SERIES) Use with 15136 STARTING SHAFT (NITRO START G/F SERIES) Replacement Nitro Start Back Plate Set for G/F Series engines. Must be used with #15136 STARTING SHAFT (NITRO START G/F SERIES) Please see our Roto Start Compatibility Guide to check if this is the right Roto Start system for you.
Starting Equipment
Fastrax 2100Mah Glow Igniter OnlyReplacement Glow Stick starter. 2100mAh glow start supplied as starter only, no charger.
Nitro Engines - Accessories
Davide Ongaro PRO Fuel Bottle 500ml - World Champion Edition37306 - PRO Fuel Bottle 500ml - World Champion Edition PRO FUEL BOTTLE 500ML - WORLD CHAMPION EDITION The fuel bottle for the ambitious racer. The super-soft bottle is made of a very elastic material. This means that less force is required and you can refuel or take fuel from the tank more precisely. A special fastening prevents the cap from loosening even with great force. Fast and safe pit stops are guaranteed with this fuel bottle. The blue anodised spout with the Davide Ongaro World Champion engraving is a reminder of what can be achieved with willpower and the right equipment.
Nitro Engines - Accessories
SkyRC Nitro Engine HeaterSkyRC Nitro Engine Heater Part number: SK-600066 Description The SKYRC engine heater uses technology similar to that used by Formula 1, Indy Car and NASCAR Teams! It will properly pre-heat your engine to 60-70 C in 10 minutes based on ambient temperature. SKYRC engine heater will pre-heat all the critical parts of your nitro engine, giving you a minimal of stress and wear on the engine. It help relieve the stress on the crank, con-rod, piston and sleeve during warm-up. It also give you a very easy and smooth engine start, with no stress on your starterbox. Fuel consumption is much less, as you do not have to spend time warming up and adjusting your engine. A pre-heatet glow-plug will increase the life of your plug. It is also perfect for break-in, as it reduces the "pinch" on your new engine. You will experience that engine pre-heating is a must. Most importantly, it will quickly pay for itself by increasing engine life and performance! Features: MCU control heating time and heating...
