Evader (ST/DT/EXT/EXT2/EXB & BL)

This is the replacement top shaft for the Duratrax Evader ST. This is the shaft that supports the transmission. FEATURES: Metal construction Silver in color 18T gear integrated on the shaft INCLUDES: One Topshaft w/18 Tooth Gear One 2x10mm spring pin Two 5.4mm washers REQUIRES: Installation into an Evader...

These are the Rear Suspension Arms for the Evader ST. This is a Stress Tech Part. FEATURES: Polypropylene construction INCLUDES: One left suspension arm (key# 36) One right suspension arm (key# 37) SPECS: Length: 105mm Width: 45mm Height: 8mm

This is the Stock Replacement Spur Gear for the Duratrax Evader ST. This is the main gear of the vehicle. FEATURES: Durable nylon construction INCLUDES: One 88 Tooth Spur Gear (key #16) Two 3x6mm round head machine screws (key J) REQUIRES: Installation onto vehicle. SPECS: Total outer diameter: 47.4mm...

This is the Spur Gear for the Evader BX from Duratrax. FEATURES: Black plastic construction INCLUDES: One 48 pitch 81 Tooth spur gear REQUIRES: Installation on the Evader BX SPECS: Diameter: 1.75:/ 44.45mm Thickness: .125"/ 3.175mm COMMENTS: This is a direct fit replacement spur gear for the Evader ...

These are the replacement Slipper Pads from Duratrax. These work on the Evader trucks. FEATURES: Blue rubber slipper pads, Key #64 INCLUDES: Two slipper pads for the Duratrax electric Evader truck REQUIRES: Installation COMMENTS: These work on the Nitro and Electric Evader Vehicles.

This is the replacement Rear Shock Tower for the Duratrax Evader EXT FEATURES: Composite nylon construction, black in color Replaces a worn or damaged shock tower INCLUDES: One Rear Shock Tower - key number 40 REQUIRES: Installation following the model manual SPECS: Length: 2.82" (71mm) Width: 4.25"...

This is a pair of replacement Rear Axles and Pins for the Duratrax Evader EXT FEATURES: Steel construction, black in color Replaces worn or damaged rear axles and pins INCLUDES: Two Rear Axles - key number 9 Two 1.6x10mm Axle Pins - REQUIRES: Installation following the model manual SPECS: Length: 1.66"...

This is the replacement Knuckle Arm Set for the Duratrax Evader EXT FEATURES: Nylon construction, black in color Replaces worn or damaged knuckle arms INCLUDES: One Left Front Knuckle Arm - key number 24 One Right Front Knuckle Arm - key number 25 REQUIRES: Installation following the model manual COMMENTS:...

These are replacement King Pins for the Duratrax Evader ST. FEATURES: Steel construction INCLUDES: Twin King Pins and four 2.75 x 5.5 x .8mm kingpin spacers REQUIRES: E-Clip (2mm) SPECS: Length: 35mm (1.378") Diameter: 2.4mm (0.096") Ball Diameter: 4.3mm (0.172")

This is the Metal Idler Gear & Shaft for the DuraTrax Evader EXT2. FEATURES: Steel and aluminum construction INCLUDES: Metal Idler Gear & Shaft REQUIRES: Installing inside transmission Two 5x10mm Bearings (DTXC1535) to install in either side of idler gear

These are Replacement Rear Hubs for the Duratrax Evader EP. FEATURES: Black Plastic Construction Includes plastic spacers Includes metal Axle Sleeves INCLUDES: One Left Hub (#26) One Right Hub (#27) Four Washers (#58) Two Axle Sleeves (#88) REQUIRES: Evader SPECS: Hub Washer Sleeve Length: 31.8 mm (1.25")...

This is a pair of replacement Front Hub Carriers for the Duratrax Evader EXT FEATURES: Nylon construction, black in color Replaces worn or damaged hub carriers INCLUDES: Two Front Hub Carrier - key number 28 REQUIRES: Installation following the model manual COMMENTS: For the front knuckle arms order...