DURATRAX - Replacement Parts

This is the Servo Saver Left Post for the Street Force GP2. FEATURES: Black steel construction INCLUDES: One left post (Key #110) REQUIRES: Installing on vehicle SPECS: Length: 1.2" (30.1mm) Diameter: 0.16" (4.1mm)

Brake Disk Street Force GP

DTXC6815 Duratrax Bulkhead Center Street Force GP SKU:dtxc6815 UPC:753600268157 CONDITION:New This is the Center Bulkhead for the Street Force GP Kits. Features: Black nylon construction.

These are the Differential Balls for the Street Force GP. FEATURES: Steel diff balls INCLUDES: Eight diff balls (#21) SPECS: Diameter: 1/8"

These are the Differential Rings for the Street Force GP. FEATURES: Steel diff rings INCLUDES: Two diff rings (#24) SPECS: Outer Diameter: 20.7mm Inner Diameter: 12mm

Steering Drag Link Street Force GP 2 (2)

This is the Steering Rod Set for the Street Force GP. FEATURES: Steel rod Black nylon rod ends Steel ball studs INCLUDES: One 32.5mm rod (#113) Two 4mm ball studs (#49) Two 4mm rod ends (#114) COMMENTS: This is the rod that goes between the servo arm and the servo saver.

These are the Thrust Balls for the Street Force GP. FEATURES: Steel thrust balls INCLUDES: Ten thrust balls 1/16"(#27) COMMENTS: These balls go between the thrust washers(#26)

These are the Thrust Washers for the Street Force GP. FEATURES: Steel thrust washers INCLUDES: Two thrust washers(#26) COMMENTS: The thrust balls(#27) go between the washers and then all go into long diff joint(#25).

These are the Replacement Tie-Rods for the Street Force GP. These are Mounted onto a 4mm ball on the Steering Bellcrank and the Front Wheel Hubs. Features: Turnbuckles: Metal Construction. Threaded on both ends. Integrated Nut in Middle of Turnbuckle for easy adjust. Silver in Color Ballcups: Nylon Construction....

These are the Replacement Front Wheel Hubs for the Street Force GP. This holds the Front Axle and attaches to the Hub Carrier. FEATURES: Nylon Construction Made to Accept 5X10mm Bearings Black in Color INCLUDES: One Left Front Wheel Hub One Right Front Wheel Hub

This is the Right Servo Saver Post for the Street Force GP. FEATURES: Steel spring Aluminum post and nut Brass shaft INCLUDES: One spring(#105) One post(#102) One nut(#106) One shaft(#101) REQUIRES: The servo saver arms (DTXC8855)