Starting systems
FASTRAX
Fastrax 2.5mm Pull Start Mounting Screws (4)Fastrax 2.5mm Pull Start Mounting Screws (4) BRAND: FASTRAX PART NUMBER: FAST181
Starting systems
Start Shaft For Ft Torque StartFastrax Start Shaft For Ft Torque Start BRAND: FASTRAX PART NUMBER: FT02622A Fastrax Start Shaft For FT Torque Start (HEX TO BALL HEX) Fastrax Start Shaft For FT Torque Start
Starting Equipment
Rotostart 3 Starter Shaft 225mm160243 - Rotostart 3 Starter Shaft 225mm Starter Shaft only for the HPI Roto Start 3 System This Xtra-Long startingshaft will make sure you can get through to the back of the engine without struggle even on the Savage XL 5.9 Genuine HPI quality spare part to provide easy maintenance and repairs for the HPI Roto Start 3 System.
Starting systems
Roto Start Backplate ZR.21 Sport Pullstart38145 - Roto Start Backplate ZR.21 Sport Pullstart
Starting systems
Backplate Only For Fastrax Torque Start (Hobao)Backplate Only For Fastrax Torque Start (Hobao) BRAND: FASTRAX PART NUMBER: FT02624-11 Fastrax Backplate For Fastrax Torque Start (Hobao) Fastrax Backplate For Fastrax Torque Start (Hobao). Please Note: This item is not compatible with the new HoBao Cops design of pull-start engines.
Nitro Engines - Replacement parts
PULLSTART ASSEMBLY (WITHOUT ONE WAY BEARING)1428 - PULLSTART ASSEMBLY (WITHOUT ONE WAY BEARING) NITRO STAR G3.0 / S-25 / F series Replacement Pullstart for F & G Series engines using 12mm One-Way Bearing #1430 For 14mm version, please see part #107828
Starting systems
Roto Start System - For Hobao Hyper 21/28 EnginesRoto Start System - For Hobao Hyper 21/28 Engines BRAND: FASTRAX PART NUMBER: FT02623H Fastrax Roto Start (with Hyper 21 Plate) Start your nitro R/C engine effortlessly using this new Roto Start with powerful 550 motor. Insert the 6mm shaft with hexball tip into the new Torque-Slip design backplate receptacle to start your engine. The torque slip back platefeatures a specially design 'slip' unit to avoid possible damage should the engine lock up. Please Note: This item is not compatible with the new HoBao Cops design of pull-start engines. Tech Note: Starting any engine should be done in short, sharp bursts. These are NOT designed to be "held on" for more than 15+ seconds at a time - doing so will cause heat build up and gear damage.
Starting systems
Competition Starter Box - WorksTeam EditionCOMPETITION STARTER BOX - WORKSTEAM EDITION We proudly present the popular Competition Starterbox in the LRP Works Team Edition. Solid technology, blue anodized top plate, powerful 750 size motor that drives the extra high, robust rubberized flywheel with 14.4V (12V operation also possible), for reliable starting of completely new and already run-in engines. And where are the bodyclips during the starting procedure? On the magnetic strip above the switch! The on/off switch on the rear prevents accidental starting of the boxt in the heat of the race and also allows battery saving operation. The starter box now also includes the larger mounts for truggies, so that all common 1/8 and 1/10 nitro cars can be started. The starter box can be operated with 2x NiMh batteries, 2x 2S Lipos, or with a 12V car battery (not included). Start like a world champion!
