Shock Absorber Pits Holder
Product information "Shock Absorber Pits Holder" This multifunctional talent from Robitronic is primarily used as an aid for filling up to 4 shock absorbers - ideal for the 1/10 scale. The stand consists of 5 individual parts which simply have to be plugged into each other. On the front there is a practical magnet board to hold screws, cotter pins or the like. The four holes of the top tier are 15mm in diameter, the top edge of the top tier to the floor is approximately 86mm. The holes on the bottom tier taper down and have a diameter of 14.5mm, reducing to 12mm. The top edge of the lower tier measures approximately 51mm to the floor. Technical specifications: Thickness of the plastic parts 3.5mm The wavy (side) incisions on the top floor are about 4mm wide The magnetic field measures approx. 26mm x 84mm Dimensions (H x W x D): approx. 90 x 102 x 58mm Scope of delivery: Damper filling level + magnetic board (without damper)
This multifunctional talent from Robitronic is primarily used as an aid for filling up to 4 shock absorbers - ideal for the 1/10 scale.
The stand consists of 5 individual parts which simply have to be plugged into each other. On the front there is a practical magnet board to hold screws, cotter pins or the like. The four holes of the top tier are 15mm in diameter, the top edge of the top tier to the floor is approximately 86mm. The holes on the bottom tier taper down and have a diameter of 14.5mm, reducing to 12mm. The top edge of the lower tier measures approximately 51mm to the floor.
Technical specifications:
- Thickness of the plastic parts 3.5mm
- The wavy (side) incisions on the top floor are about 4mm wide
- The magnetic field measures approx. 26mm x 84mm
- Dimensions (H x W x D): approx. 90 x 102 x 58mm
| Title | Shock Absorber Pits Holder |
|---|---|
| Brand | Robitronic |
| Category | Tools & Accessories |
| SKU | R07501 |
| Condition | new |
| MPN | R07501 |
